, Corning NY) using an Affymetrix HSP mutation GeneChip instrument at the MSU Research Technology Support Facility (RTSF). Each strain was streaked from frozen stock on two tryptose soya agar plates containing 5% defibrinated sheeps’ blood; plates were incubated for 48 hours at 37°C in 5% CO2. A single isolated colony from each plate was chosen and streaked onto another plate (biological replicates). Growth from each of the second plates was harvested separately and genomic DNA was isolated using the CTAB procedure described in Ausubel et al. [69]. One μg DNA was sheared by sonication to 0.5–2.0 kbp and labeled with aminoallyl-dUTP using the BioPrime random priming

DNA labeling kit® (Invitrogen, Carlsbad, CA). Unreacted components were removed using a Qiagen PCR Purification kit® (Qiagen, Valencia, CA). Aliquots of the purified aminoallyl-dU-containing DNA were then reacted with Cy5 or Cy3 dye (Amersham, Piscataway, NJ). Unreacted dye was removed using a Qiagen PCR Purification kit®. The

two separate DNA extractions done for each strain were used in separate hybridizations (technical replicates). The experiment was repeated with the dyes reversed; thus a total of four chips were hybridized and compared for each strain. The spots for each gene are duplicated three times on each chip, for a total of 12 comparisons for each strain. For hybridization, Ambion SlideHyb solution (Ambion, Austin, TX) was preheated to 54°C. The combined Cy3/Cy5 labeled DNA samples were resuspended in 4 Selonsertib research buy μl 10 mM EDTA. The sample was then check details denatured at 95°C for 10 minutes. During this time the cover slip was washed in 95% ETOH, 0.1% SDS and sterile ddH2O. Cover slips were dried with filtered air. After denaturation of sample, 30 μl of prewarmed

Ambion SlideHyb solution was added. The slides were Cyclin-dependent kinase 3 centered on a warmed hybridization cassette and a cleaned cover slip was placed face down and centered over the spots. The denatured sample was then gently pipetted using capillary action to fill the area underneath the cover slip. Sixteen μl of ddH2O was added to the grooved edge of each hybridization chamber. The top of the hybridization chamber was then secured; the slides were placed on a rack in a 54°C water bath overnight. All steps were performed in the dark. Post-hybridization washes were performed as follows. In the dark, the opened cassette was gently moved up and down in warmed 1 × SSC, 0.2% SDS until the cover slip fell off. The slide was placed on an orbital platform shaker at low speed for 4 minutes in the dark. The slide was transferred to 0.1 × SSC containing 0.2% SDS and incubated on the platform shaker at low speed for 4 min. The process was repeated twice with 0.1 × SSC. The slide was placed in a 50 ml conical tube covered with aluminum foil and centrifuged at 1000 rpm in a clinical centrifuge in a swinging bucket rotor for 5 min.